Smart way of control: Brain computer interface

8051, Sensor 6000, EEG and labview interface

An electroencephalogram (EEG) based brain-computer interface (BCI) was connected with a Virtual Reality system in order to control a smart home application. Therefore special control masks were developed which allowed using the sensor-6000 component of the EEG as input signal for the BCI system. Control commands for switching TV channels, for opening and closing doors and windows, for navigation and conversation were realized. View More
Developing an Intelligent e-Restaurant with a Menu Recommender for Customer- Centric Service(zigbee)

8051/PIC Microcontroller,l293d ic,zigbee,power supply,serial comm,lcd 16*2

The proposed menu recommender enables service staff to immediately identify a customers status, favorite menus, preference, and consumption record by smart card and utilize the built-in menu recommender to offer optimal menu choices to the customer and pay the bill. To reach this goal, this study integrates smart card, Zigbee, database technologies, technology acceptance model (TAM), and a menu recommender to develop an intelligent e-restaurant for customer centric service. Based on menu materials or meal popularity service staff can provide for new customers and that store the customers preference in the system. This system useful for service providers increase their customer interactions and provide fast and thoughtful services. View More
A CAN protocol based embedded system to avoid rear-end collision of vehicles

Electrical Appliances control through PC use 8051 UC

8051/PIC/ARM Microcontroller ,power supply,serial comm

The aim of this project is to control the electrical appliances through a personal computer (PC). For example, theatre lighting can be centrally controlled form the PC for better stage management.Presently, they are manually managed which makes it difficult to coordinate the lighting with the respective scene. With this system, one can control the electrical appliances ON/OFF by just being seated at one place using a PC.This system is integrated with the electrical loads and also connected to the PC where centralized control takes place. It uses an RS-232 protocol from the microcontroller to communicate with the PC.To turn on/off the appliances, we use Hyper Terminal on PC. Once the connection is established with the PC, then the system starts working. The microcontroller used in this project belongs to 8051 family. View More
PIR Based Energy Saving System Use 8051 Microcontroller

8051/PIC/ARM Microcontroller ,power supply,serial comm,16*2 lcd,PIR sensor

The purpose of this project is to save the power used in places like libraries, staircases, parking, gardens etc. where lots of power is wasted unnecessarily by keeping the fans and lights ON even when there is no one present, and also at places where security is paramount and an alarm needs to be generated when someone is passing by. Thus, using the same machine, it can be used to save the power and also as a security alarm using a simple sensor called Passive Infrared (PIR) Sensor. When a person enters the monitored area, the Infrared energy emitted from the living body is focused by a Fresnel lens segment and the PIR sensor activates, and gives to the microcontroller which acts as a security surveillance system or power saving device according to the position of switch. View More
Wireless Energy Transmission System

winding ,frequency amplifier,power supply

A kind of wireless energy transmission system which is based on the electromagnetism induction theory of faraday, is presented to resolve how to supply energy for the remote controlled capsule of special-site delivery. The implement of energy transmission is discussed in detail. And a set of apparatus which can wirelessly transmit energy is also designed for electronic capsule. The magnetic field intensity distribution is simulated by using the computer-aided analysis. The results of experiments are presented and evaluated. It indicates that the apparatus can effectively and wirelessly transmit energy. View More
TSOP Based Home automation

8051/PIC/ARM Microcontroller ,power supply,serial comm,Remote,electrical devices

Home automation is not a new concept in today’s world, it is used to provide convenience for user to remotely control and monitor the appliances and it provides a better use of electricity. The efficient use of electricity makes the HOME automation to play an important role in daily life. As by the growth of PC (personal computers), internet, mobile phone and wireless technology makes it easy for a user to remotely access and controls the appliances. A lot of research has been done and many solutions have been proposed to remotely access the HOME appliances. View More
Graphical LCD 128*64 interface use microcontroller

8051/pic/avr Microcontroller power supply ,serial communication ,graphical lcd,

The Graphics LCD as the name suggests is a type of LCD which can display graphics. The graphical representation of any data presents good understanding than just characters. More user friendly applications can be designed by using the graphical LCDs. The graphical LCD can be used for advertisement boards or information boards and so on. This article explains the method of displaying image on a 128x64 graphical LCD using AT89C52. For basic operations and working, refer Graphics LCD interfacing with 8051. View More
RFID Based Toll Gate Automation

8051/pic/avr Microcontroller power supply ,serial communication,DS1307,AT24c08,16*2 lcd,buzzer ,motor

Electronic automated toll collection systems are very popular days. They do not require manual collection and operation of toll barriers. The details about the vehicles and payment are stored in an RFID based system.The project developed by interfacing RFID with AT89V51RD2 Microcontroller. The relevant message display on a 16x2 LCD. View More
Automatic Gun Shootout System use PIR Sensor

8051/pic/avr/arm Microcontroller,power supply serial comm,pir sen

Sensor Based Automatic Gun targeting System for Border Area is an automated gun target and firing system if found an object within a range of sensors. The project is primarily based on PIR Sensors, Microcontroller and wireless transmitter and receiving units using FSK. View More
8051 Development board Basic

PIC Development Board with our own Programmer

DTMF Based Home Automation

8051/pic/avr/arm microcontroller ,dtmf ic,lcd,electrical devices

Traditionally electrical appliances in a home are controlled via switches that regulate the electricity to these devices. this project we propose a unique System for Home automation utilizing Dual Tone Multi Frequency (DTMF) that is paired with a wireless module to provide seamless wireless control over many devices in a house. View More
GSM Based Accident Alert system

8051/pic microcontroller ,gsm module ,lcd

Initially the GPS continuously takes input data from the satellite and stores the latitude and longitude values in AT89s52 microcontroller's buffer. If we have to track the vehicle, we need to send a message to GSM device, by which it gets activated. It also gets activated by detecting accident on the shock sensor connected to vehicle. Parallely deactivates GPS with the help of relay .Once GSM gets activated it takes the last received latitude and longitude positions values from the buffer and sends a message to the particular number or laptop which is predefined in the program. Once message has been sent to the predefined device the GSM gets deactivated and GPS gets activated. View More
Solar Tracking system use Stepper Motor

8051/PIC/avr/arm microcontroller ic, solar panel, battary charger

Solar energy is rapidly advancing as an important means of renewable energy resource. Solar tracking enables more solar energy to be generated because the solar panel is able to maintain a perpendicular profile to the sun’s rays. Though initial cost of setting up a solar tracking system is high, this paper proposes a cheaper solution. Design and construction of a prototype for solar tracking system with single degree of freedom, which detects the sunlight using Light Dependent Resistors (LDR), is discussed in this paper. View More
Temperature Controller FAN Use Microcontroller

8051/PIC/avr/arm/Arduino Microcontroller Temprature sensor,16*2 lcd,fan

This project is used to control the fan speed according to the temperature and it also indicates the temperature. The system will get the temperature sense from the temperature measuring IC corresponding to which temperature digits are obtained and displayed and it will control the speed of fan according the duty cycle(PWM) values stored in a look up table accordingly to the temperature measured. View More
GSM Based Security system

8051/pic microcontroller ,gsm module ,lcd,power supply,serial comm.

The project is aimed at developing the security of Home against Intruders , Gas Leak and Fire . In any of the above three cases any one met while you are out of your home than the device sends SMS to the emergency no provided to it.The report consists of a background into the area of 8051 microcontroller and mobile communication, how they are interfaced to each other and AT (Attention) commands set used in communication. View More
RF Based Wireless Device Control

8051/PIC/AVR Microcontroller rf module,electrical devices,power supply serial communication

The project is aimed at developing the security of Home against Intruders , Gas Leak and Fire . In any of the above three cases any one met while you are out of your home than the device sends SMS to the emergency no provided to it.The report consists of a background into the area of 8051 microcontroller and mobile communication, how they are interfaced to each other and AT (Attention) commands set used in communication. View More
PC Based Robot

8051/pic/avr/arm Microcontroller,l293d ic,robot chasis,power supply,serial comm.

The advent of new high-speed technology and the growing computer capacity provided realistic opportunity for new robot controls and realization of new methods of control theory. This technical improvement together with the need for high performance robots created faster, more accurate and more intelligent robots using new robots control devices, new drives and advanced control algorithms.This project describes a new economical solution of robot control systems. The presented robot control system can be used for different sophisticated robot applications. The control system consists of a PC, a microcontroller that collects data from the PC and control the robot. View More
Broad Cast and Unicast Communication

8051 Microcontroller ,power supply,serial comm,lcd,

We present a process calculus for the analysis of Mobile Ad Hoc Networks (MANETs) and their protocols. Our calculus captures the ability of a MANET node to broadcast a message to any other node within its physical transmission range, and to move in and out of the transmission range of other nodes in the network. In order to reason about cost-effective ad hoc routing protocols, we also model unicast and multicast communications. We show how to use our calculus to prove some useful connectivity properties of MANETs. View More
8x8x8 LED Cube

8051/pic/avr/arm microcontroller power supply,serial comm,led cube,74hc574

Our project consists of building a 3 dimensional LED array that will be able to display various graphics through the concept of persistence of vision. The array will also be sensitive to motion in three directions, allowing it to focus certain graphics to a targeted audience through motion detection. There will be several options for display including non-directional animations and direction focused graphics. We will be using infrared sensors to design and build a motion detection system that will be fed into our processor. The processor will, through several inputs, decide what graphic to present and will feed it to an FPGA. The FPGA will then process the necessary data and output to the 512 LEDs to be used in the 3D array. View More
Led bar graph

In this project we wanted to be able to visualize an analog signal using LED bargraph displays. In this project we explore capturing and smoothing an analog input signal, pseudo-multiplexing of output, and using a transistor as a switch to switch more current than the microcontroller can handle. View More
Data logger

8051/pic/avr microcontroller power supply serial comm. Gsm module,pc

A data logger (also datalogger or data recorder) is an electronic device that records data over time or in relation to location either with a built in instrument or sensor or via external instruments and sensors. One of the primary benefits of using data loggers is the ability to automatically collect data on a 24-hour basis. Upon activation, data loggers are typically deployed and left unattended to measure and record information for the duration of the monitoring period. This allows for a comprehensive, accurate picture of the environmental conditions being monitored, such as air temperature and relative humidity. View More
Propeller clock

8051/pic microcontroller,power supply,serial comm,dc motor,rtc

Propeller clock is a special kind of circular LED display. It is making use of POV,Persistence of Vision, which means that if something appears in the same spot consistently, at least 50-60 times per second, our brains think that it’s permanently there when it is not. This propeller clock is mechanically scanned and displays in digital format .Made from scrap it can be used anywhere and everywhere and the interesting fact is that its crystal clear display. Maintenance and repairing of the display is so easy, that anyone having a little electronics knowledge can take care of this. All the synchronizing can be implemented through software .The software part of clock works using interrupts and timers. View More
Airport security system using RFID technology

8051/pic/avr Microcontroller power supply ,serial communication,DS1307,AT24c08,16*2 lcd,buzzer ,motor

Aim of our project is passenger's luggage vigilances for avoid mishandling and avoid forgetting luggage in travelling.In our project RF ID MODEM is used for identify and verify the luggage. Each luggage bag having a one identifying RF ID TAG that tag produces one identification code for when rf id modem reading that tag. This RF ID MODEM is placed in the entrance of the airport IN and OUT gates. Passenger will enter in the main gate with the help of pass port, that passport id number is stored in the micro controller and that passport id number's, luggage id number also stored in that passport id number one by one using RF ID TAG. View More
Bluetooth based Sensor Network for industrial Monitoring

8051/pic microcontroller,power supply,serial comm,pc,bluetooth module

A wireless smart sensor platform (based on patent pending technologies [1, 2]) targeted for instrumentation and predictive maintenance systems is presented. The generic smart sensor platform with ‘plug-and-play’ capability supports hardware interface, payload and communications needs of multiple inertial and position sensors, and actuators, using a RF link (Wi-Fi, Bluetooth, or RFID) for communications, in a point-to-point topology. The design also provides means to update operating and monitoring parameters as well as sensor/RF link specific firmware modules ‘over-the-air’. Sample implementations for industrial applications and system performance are discussed. View More
Ultrasonic parking guiding system

8051/pic/ microcontroller,power supply,serial comm,ultrasonic sensor, ir sensor

Parking a vehicle is one of the biggest task in a congestion area and especially when you are reversing back your vehicle u couldn’t guess the exact distance you are moving and how much distance is the vehicle from you. This Project is used to avoid all the above convictions by using ultrasonic sensor. This ultrasonic sensor is used to read the distance and display it on your dash board. When your vehicle is moving back the exact distance between your vehicle and the object is shown in LCD and if the distance is reducing to a certain limit a warning is raised by making sound. This helps parking your car with more safely. View More
Ups battery management for industries using GSM

8051/pic/ microcontroller,power supply,serial comm,gsm module,battary,ups

The main aim of the project is to provide back up power supply to corporate ,when main supply is not working. In this project , we are using two transformers. One ,as mains supply to corporate and second transformer as secondary (UPS) supply. In the beginning we are giving the main supply by transformer one ,but if due to some reason mains supply is not working. Then by power detector circuit this information goes to microcontroller and buzzer will produce an alarming sound. Microcontroller will send the message to authorized person by GSM modem. View More
Intelligent embedded control warning system car reversing or speed detector

8051/pic/ microcontroller,power supply,serial comm,ultrasonic sensor, ir sensor ,speed detector

This project is developed for the users to detect the speed of a car and to stop if it exceeds the particular speed.It consists of two transmitters and two receivers. One transmitter is connected first and a receiver is fixed just opposite to the transmitter. The other transmitter is connected at the same side but something away from the first transmitter. The second receiver is connected just opposite the second transmitter.When the vehicle passes the first transmitting and receiving unit, it senses that one vehicle is crossing. When it crosses the second unit, it also senses. The microcontroller unit calculates the speed=displacement/time taken. If the speed exceeds the particular level, the buzzer produces sound. View More
Bluetooth based steeper motor control

8051/pic microcontroller,power supply,serial comm,pc,bluetooth module,stepper motor

The main objective of this project is to control stepper motor using blue tooth concept, (i.e. by wireless communication). The main advantage of this project is to overcome the line of sight operation in IR transmitter, thus we can operate this bluetooth transmitter in omni-direction. These equipments can be controlled within a distance of about 100ft. Here we use the unlicensed 433.92MHZ Industrial, Scientific and Medical (ISM) band that may be used freely worldwide. View More
Digital calendar

8051/pic/ microcontroller,power supply,serial comm,7 segment display

Digital Calendar project is developed for the users to use a digital calendar. The main parts of this project are key pad, microcontroller unit and LCD display.In normal operation mode, the LCD display displays the Current time, date and day like an ordinary calendar.The user can set the time, date and day using the key pad. When the user sets the timings, the settings will be displayed in the LCD display. The settings are stored in the microcontroller memory. View More
Moving person detection system using ultrasonic sensor

8051/pic/ microcontroller,power supply,serial comm,ultrasonic sensor.

The ultrasonic motion detector is a project that uses an ultrasonic sensor as its base to detect movement or moving object in small places. It is design to be a low cost ultrasonic motion detector. The transmitter sensor use to generate signal in that area. When the signal is block by moving or movement the receiver will gets the signal and amplifies the signal using transistor. The transistor is use as an amplifier to the receiver circuit. The Led and buzzer in the circuit use to see if there is movement detect by the sensor. The relay use to trigger another circuit when there is movement detects. View More
RFID based system for school children transportation safety enhance

8051/pic/avr Microcontroller power supply ,serial communication,DS1307,AT24c08,16*2 lcd,buzzer ,motor,rfid module

This project tested the applicability of radio frequency identification (RFID) technology in tracking and monitoring children during their trip to and from school on school busses. This project aims to provide the total security for school children. Range and Obstacle detection and accident detected sensors are implanted on the front surface of the bus in order to avoid collision with another vehicle on the Road. Each student is tagged with unique code. Two counters used at the entrance and exit location of the bus. Wireless communication technology (IEEE 802. 4. 15) is used to inform the status of the bus to the school principal. The absentee record of the student will be send to the concerned parent before leaving the children entry point. The return information is also informed to the parent using GSM technology. The results are favorably good to meet the challenges of the security issues. View More
Electrical parameter in industry is monitoring through pc

8051/pic/ microcontroller,power supply,serial comm,pc,current sensor ,volt sensor

This project aims at building an efficient and automatic power survey system, which is capable of monitoring and control the electrical parameters of high voltage devices, which are present in real time industrial environment. The system makes use of RS485 based communication which is suitable of transferring data over longer distances. The purpose of this project is to acquire the remote real time electrical parameters like voltage, current and frequency also temperature and send these real time values over PC using RS485 cable. The data is sense using various electrical sense and process by Microcontroller. The processed data is downloaded and display on to the computer for further processing. This project makes use of an onboard computer which is commonly termed as microcontroller. View More
Design and implementation of vehicle tracking system using gps, gsm or gprs technology and smart phone application

8051/pic/ microcontroller,power supply,serial comm,pc,gsm,gps module

This Project presents an automotive localization system using GPS and GSM-SMS services. The system permits localization of the automobile and transmitting the position to the owner on his mobile phone as a short message (SMS) at his request. The system can be interconnected with the car alarm system and alert the owner on his mobile phone. This tracking system is composed of a GPS receiver, Microcontroller and a GSM Modem. GPS Receiver gets the location information from satellites in the form of latitude and longitude. The Microcontroller processes this information and this processed information is sent to the user/ owner using GSM modem. Microcontroller also gets the speed of the vehicle and sends it to user/owner. The presented application is a low cost solution for automobile position and status, very useful in case of car theft situations, for monitoring adolescent drivers by their parents as well as in car tracking system applications. View More
Intelligent wireless street light system

Lighting systems, particularly within the public sector, are still designed per the previous standards of reliability and that they don't usually profit of latest technological developments. Use of renewable energy sources instead of typical power sources, therefore taking care of the environment is another advantage of this system. In this paper a wireless street lighting system is developed. It consists of set of sensors to detect the presence of humans and checking for the intensity of light and transmitting the light in wireless. View More
Voice control robot

8051/pic/ microcontroller,power supply,serial comm,apr9600

The main objective of the project is to control the robotic vehicle in a desired position, remotely through user voice commands by attaching a speech-recognition module to the microcontroller unit and using an RF communication. View More
Automatic analytics robot

8051/pic microcontroller,power supply,serial comm,dc motor,ultrasonic sensor

An analysis of the transportation and handling systems used in assembly/disassembly flexible manufacturing line (A/D-FML) is presented in this project. View More
Traffic sign recognition for autonomous driving robot

The Autonomous Driving Robot performs detection and classification of traffic signs and traffic lights based on the analysis of images acquired by a camera mounted on its chassis. View More
Mobile Control ROBOT

8051/pic microcontroller,power supply,serial comm,dtmf,mobile,dc motor

Mobile Control Robot – Cell phone operated Land rover. It is one of the simple robotics projects using microcontroller. In Cell phone Robot project, we need two mobile phones. The “mobile controlled robot” is controlled by a mobile phone that makes a call to the another mobile phone attached to the robot. In the course of a call, if any button is pressed, a tone corresponding to the button pressed is heard at the other end of the call. This tone is called “Dual Tone Multiple-Frequency” (DTMF) tone. The robot perceives this DTMF tone with the help of the phone stacked on the robot. The received tone is processed by the microcontroller with the help of a decoder IC. The microcontroller then transmits the signal to the motor driver ICs to operate the motors. Since this robot is controlled by dialling a call so we can also call it as DTMF controlled robot. View More
Raspberry pi based global industrial monitoring through wireless communication

This project proposes an advanced system for process management via a credit card sized single board computer called raspberry pi based multi parameter monitoring hardware system designed using RS232 and microcontroller that measures and controls various global parameters. The system comprises of a single master and multiple slaves with wireless mode of communication and a raspberry pi system that can either operate on windows or linux operating system. The parameters that can be tracked are current, voltage, temperature, light intensity and water level. View More
Automatic Toll Gate Automation

8051/pic microcontroller,power supply,serial comm,pir sensor,seven segment,dc motor

Toll gate Automation and Vehicle Tracking is designed to automatically keep track of the vehicle's movement, record the time and the details like Owner's name, date of registration, vehicle model etc. This system is very useful for automatic vehicle tracking, time management and also for automation of Toll gate. This paper explains the implementation of Toll Gate Automation which is a step towards improving the Tracking & monitoring of vehicles, traveling in predetermined routes. In this system, a computerized system automatically identifies an approaching vehicle and records the vehicle number & Time. If the vehicle belongs to the authorized person/group, it automatically opens the Toll Gate and a predetermined amount is automatically deducted from its account. View More
Interfacing of SPI ADC MCP 3204 and LCD UART

8051/pic microcontroller,power supply,serial comm,mcp 3204,lcd

The design of Embedded Control Unit (ECU) in SCADA requires multiple sensors to be interfaced. Other than sensors, providing a low-cost User Interface (UI) is also one of the key requirements. Solutions exist for AT89S52 as CPU with ADC0808. However, this approach lacks in providing small form – factor hardware for UI as it uses 8255 PPI off - chip. This paper proposes the usage of SPI protocol, allowing 4 sensors to interface through MCP3204 SPI Chip, without compromising UI requirement. The SPI driver implementation in Keil4 using embedded – C for pre - configured adjustable threshold levels is illustrated in detail. The second part of the paper illustrates the integration of the SPI driver and providing UI – design using the 2x16 LCD and matrix Keypad. The working model of the proposed design with Proteus IDE for controlling the DC Motor based on the sensed voltages is demonstrated. View More
DTMF Based Switching For Power Efficiency

8051/pic microcontroller,power supply,serial comm,dtmf,motor,mobile

Traditionally electrical appliances in a home are controlled via switches that regulate the electricity to these devices. As the world gets more and more technologically advanced, we find new technology coming in deeper and deeper into our personal lives even at home. Home automation is becoming more and more popular around the world and is becoming a common practice. The process of home automation works by making everything in the house automatically controlled using technology to control and do the jobs that we would normally do manually. Home automation takes care of a lot of different activities in the house. this project we propose a unique System for Home automation utilizing Dual Tone Multi Frequency (DTMF) that is paired with a wireless module to provide seamless wireless control over many devices in a house. The block diagram is a shown below. This user console has many keys , each corresponding to the device that needs to be activated. The encoder encodes the user choice and sends via a FM transmitter. The FM receiver receives the modulated signal and demodulates it and the user choice is determined by the DTMF decoder. Based upon this the required appliance is triggered. View More
Garden Automation

8051/pic/avr/arm microcontroller,power supply,serial comm,ir,pir,ldr,moisture,fire sensor,lcd

The most important problems faced are the misusage of electricity and its wastage. Sometimes due to carelessness of the authorities and the workers lamps are left ON which results in wastage of electricity. Water wastage is another problem which needs to be dealt with. Our project helps to overcome all these problems. Firstly the Microcontroller around 4.00pm switches on the water supply once to water the entire garden few hours before opening of the garden for public. Next the gate is opened by running the motor which is driven by a motor driver operated by the Microcontroller. At around 6.00pm the lights are switched on depending upon the output of the LDR and the lights remain functional till the garden remains open for visitors. The garden remains open for about three hours and so around 8.50 pm a buzzer is sounded to indicate closure of the garden and alert the visitors. The gate is then closed at 9.00pm and one of the two lamps is switched off. One lamp is kept on throughout the night. In the morning the remaining lamp is switched off depending upon the signal sent by the LDR, light dependent resistor to the Microcontroller. These are the step involved in the operation of the circuit and the public garden automation. Microcontroller is used to supervise the actions of all other devices and to control the entire set of operations. View More
8051 Development board Advance

Lidar based project

Designing an autonomous soil monitoring robot.

Through the monitoring of soil conditions land managers can respond rapidly to mitigate adverse events, such as extreme weather or ongoing drought. However, without an extensive system of sensors, gathering information over a large field takes an exorbitant amount of time. This mass collection of soil data would allow farm managers to study time-lapsed trends and variables within a particular region to provide quick assessment of land conditions. Currently, the client uses a bulky handheld wireless soil sensor to measure moisture content and temperature. To take measurements, the client must walk to the coordinates of interest, clear the ground of vegetation, manually insert the probe into the ground, and log the reading. The team is designing an autonomous soil monitoring rover to expedite data collection and reduce labor. The rover will be able to autonomously navigate through a field several acres in size and avoid obstacles. It will gather data on soil moisture and temperature at a set of given waypoints and relay the information back to the farm manager. Constructed with a custom welded steel frame, the first rover prototype will be a four-wheeled vehicle with front wheel drive. The vehicle will be equipped with a Stevens Hydra Probe II mounted to a linear actuator. Navigation will be handled using a GPS and wheel encoders. When completed, the rover will allow the land manager to analyze trends between soil data and pasture health, providing an accurate snapshot of a field. View More
Sun tracking schemes for photovoltaic panels

8051/pic/avr/arm microcontroller,power supply,serial comm,photovolatic panel,lcd

The paper we present, aims to analyse the performance of microcontroller based different tracking modules as solar energy harness techniques. For testing purpose high precision, low cost, table-top solar positioning devices were made. This paper includes assessment of microcontroller based closed loop type single axis tracker with the angle regulation range of 0–180° from east to west and returning from west to the east and double axis tracker with angle limit of the horizontal axis and the vertical axis between 180° and 90° respectively . View More
Overload voltage protection

arduino microcontroller,power supply,serial comm,volt sensor,lcd

This aim of this project is to develop a low voltage and high voltage tripping mechanism to protected the load from damage. The fluctuation in AC supply is frequent in hones and industries. View More
Fan speed controller using aurdino

arduino microcontroller,power supply,serial comm,lm35,lcd

In many small or large industry, you may have seen such a lot of fan that speed is control according to temperature of the place. Thus during this article we have present a demo of that application. It's assume that you have an idea to how to read reading from the temperature sensor IC. In industry temperature range will be more than 100 oC but here we will work on very low range. View More
Digital volt meter using aurdino

arduino microcontroller,power supply,serial comm,volt sensor,lcd

It's relatively simple to use an Arduino to measure voltages. The Arduino has several analog input pins that connect to an analog-to-digital converter (ADC) inside the Arduino. The Arduino ADC is a ten-bit converter, meaning that the output value will range from 0 to 1023. We will obtain this value by using the analogRead() function. If you know the reference voltage--in this case we will use 5 V--you can easily calculate the voltage present at the analog input. To display the measured voltage, we will use a liquid crystal display (LCD) that has two lines of 16 characters. LCDs are widely used to display data by devices such as calculators, microwave ovens, and many other electrical appliances. This project will also show you how to measure voltages above the reference voltage by using a voltage divider. View More
Electronic voting machine

8051/pic/avr/arm microcontroller,power supply,serial comm,matrix keypad,lcd

A very low cost and effective voting machine has been implemented using 8051 based microcontroller. This voting system avoids multiple polling by a single user and also provides instantaneous results which are displayed on the PC. View More
PIR Based Security System

8051/pic/avr/arm microcontroller,power supply,serial comm,pir sensor,gsm module

This electronic security system can be used in banks and other high security areas.A normal electronic security system will have a transmitter and a receiver. The transmitter sends out an IR laser and this will be received by the receiver. When an intruder walks past the device, the IR beam is cut and thus the alarm is activated. But, this system has some major disadvantages like limited range and poor line of sight. These disadvantages are eliminated through the PIR sensor circuit The PIR sensor is the heart of the project. We can design the project in such a manner that as soon as the burglar or intruder walks past the sensor, the alarms would turn on and the whole lighting system could turn on. View More
RC-5 Protocol based Home Automation

8051 microcontroller,power supply,serial comm,tv remote

Automatic control of home appliances is highly demand now days .In this work, we have designed, constructed a circuit which specially meet the requirement of control the home appliance through any remote control device that is portable within the periphery of the room. The device is able to control a load of high power rating from remote area. Any equipment can be made password protected through this device. The system works satisfactorily and it is also considered to be a cost effective system. View More
GSM Based Home Automation

8051/pic/avr/arm microcontroller,power supply,serial comm,gsm module

This is a very common system, in which users can also use this system at farm house and house, offices for filling the water tanks. This system can also be used for start motor or Stop motor at defined time when water supply available. In this system Arduino is the heart of this system which takes control over whole the system process. Here a GSM module is used for sending and receiving the message. A 16x2 liquid crystal LCD for displaying the appliances status and process like SYSTEM READY, TV ON, light 1 ON, light 1 OFF, light 2 ON, light 2 OFF etc. Here AC load is used for demonstration. Three home/office appliances are used for demonstration. In which one zero watt bulb indicated by light 1 and second is 100 watt bulb indicated by light 2 and third and last is TV/LCD indicated by TV. In system has an additional function in which you will get the notification or status message on message sending number. Means if you sends message for ON OFF any electrical appliance by any mobile number then you will get status or notification message on the same mobile number. View More
RF Based Wireless less Remote Control ROBOT

8051/pic/avr/arm microcontroller,power supply,serial comm,rf module

The circuit of this project utilise the RF module (Tx/Rx) for making a wireless remote, which could be used to drive an output from a distant place. RF module, as the name suggests, uses radio frequency to send signals. These signals are transmitted at a particular frequency and a baud rate. A receiver can receive these signals only if it is configured for that frequency. View More
Fire Sensor ROBOT

8051/pic microcontroller,power supply,serial comm,fire sensor,dc motor

It is a robot that autonomously detect and extinguish fire.It use flame sensor for detection and arduino board for processing.Fire extinguisher along with electronic valve( actuator) is used to extinguish the detected fire.The robot rotates while actively scanning for fire. This scanning is performed by sensors placed on the sides.When a fire is detected, it moves in the direction of fire an stops 30 cm in front of it and trigger the extinguisher to turn out the fire. View More
DTMF(Dual tone multi frequency) Based water Pump Control

8051/pic microcontroller,power supply,serial comm,dtmf,motor,mobile

Inconvenience in switching on a water pump installed in a remote farm is a common problem faced by farmers. Many circuits have been developed to solve this problem. Most of them are expensive and microcontroller-based. Here we present a cellphone-based remote controller for water pump. By calling the cellphone attached to the controller, the water pump can be directly activated. View More
ULTRASONIC Sensor Based PATH FINDER ROBOT

8051/pic microcontroller,power supply,serial comm,ultrasoinc sensor,dc motor

In today’s world ROBOTICS is a fast growing and interesting field. ROBOT has sufficient intelligence to cover the maximum area of provided space. It has an infrared sensor which are used to sense the obstacles coming in between the path of ROBOT. It will move in a particular direction and avoid the obstacle which is coming in its path. View More
Digital Watch use DS1307

8051/pic microcontroller,power supply,serial comm,ds1307,seven segment display

In this article you will learn how to make a digital clock using Arduino and the DS1307 RTC IC. What is DS1307 IC actually? Well, it is a Real Time Clock (RTC) IC that is simple to use, low cost and easy available. The IC basically is able to count the date and time accurately and it will continue its counting if the backup battery – coin cell battery is there although the mainsupply to the IC is cut off. View More
Motor Speed Control Use PWM

8051/pic /avr/microcontroller,power supply,serial comm,motor

Direct current (DC) motors have been used in variable speed drives for a long time. Pulse width modulation (PWM) is a method for binary signals generation, which has 2 signal periods (high and low). The width (W) of each pulse varies between 0 and the period (T). The main principle is control of power by varying the duty cycle. Here the conduction time to the load is controlled. View More
Interfacing I2c RTC DS1307 and LCD UART

8051/pic microcontroller,power supply,serial comm,ds1307,lcd

The Maxim (Dallas) DS1307 Real Time Clock (RTC) chip. The DS1307 is capable to count accurately the second, minute, hour, day of the week, date of the month, month and year include the leap year until the year 2100; with its I2C (read as I squared C, Inter-Integrated Circuit) interface capabilities make this chip easily to be integrated with widely available microcontroller that has build in I2C peripheral such as Atmel AVR Mega families or Microchip PIC18 families microcontrollers. View More
UP Down Counter

8051/pic/avr/arm microcontroller,power supply,serial comm,seven segment display

The digital displays which display the score when buttons are pressed on score boards. The main heart of this score board is 2 digits up/down counter circuit. The 2 digits are displayed on two 7 segment displays. This article describes 2 digit up/down counter circuit. View More
Password Based Door lock System

8051/pic /avr/armmicrocontroller,power supply,serial comm,matrix keypad,lcd

The microcontroller based Door locker is an access control system that allows only authorized persons to access a restricted area. The system is fully controlled by the 8 bit microcontroller AT89C2051 which has a 2Kbytes of ROM for the program memory. The password is stored in the EPROM so that we can change it at any time. View More
Interfacing I2C EEPROM AT24c08 &LCD UART

8051/pic microcontroller,power supply,serial comm,at24c08,lcd

The AT24C01A/02SC/04SC/08SC/16SC provide 1024/2048/4096/8192/16384 bits of serial, electrically-erasable, and programmable read-only memory (EEPROM) organized as 128/256/512/1024/2048 words of 8 bits each. The devices are optimized for use in smart card applications where low-power and low-voltage operation may be essential. The devices are available in several standard ISO 7816 smart card modules (see Ordering Information, pages 12–13). All devices are functionally equivalent to Atmel serial EEPROM products offered in standard IC packages (PDIP, SOIC, TSSOP, MAP), with the exception of the slave address and write protect functions, which are not required for smart card applications. View More

Looking for Project training with 100% genuine placement Assistance??!!
Contact Us